Skip to main content

Filter By:

Sport/Performance

Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra Di2 drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Dura-Ace Di2 drivetrain - 4iiii Precision dual-sided power meter - ENVE SES 3.4 AR Disc wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM Force eTap AXS drivetrain w/power meter - Reserve 35mm carbon rims/DT370 hubs - Cervelo carbon handlebars and seatpost
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM RED eTap AXS drivetrain w/power meter - Zipp 303 wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
The R3 is a high performance allrounder, ready for everything from the Tuesday night world champs to an epic weekend ride. Light, stiff, and designed for confidence-boosting handling, this is a bike that you can trust. Using special carbon layup and construction techniques, Cervelo reduced the frame's weight while making it stiffer at key points. The result of this impressive stiffness-to-weight ratio is a lively and confidence-inspiring bike. Stiff and lightweight, with geometry that promotes stable and predictable handling, the R3 urges you to attack on the climb and push the pace on the descent. The R3 features a robust chain stay protector, future-proof cable management system (compatible across all types of shifting systems), and a reduced friction bottom bracket guide. Clearance for tires up to 28mm wide and frame compliance create a smoother ride. Features - Squoval Max tubes combine the attributes of a square with an oval, but with a more aerodynamic leading edge - BBright bottom bracket allows the use of larger-sized tubes in the seat tube, down tube, and lefthand chain stay - Elite Fit offers a wide range of positions for all athletes without compromising handling, comfort, or performance - Shimano Ultegra drivetrain - DT Swiss P1800 Spline 32 Disc wheels
The S-Series makes every part of your ride better: the final sprint on your Saturday morning group ride, the long climb, and a solo effort on the edge of town. We've applied years of experience of building the most aero bikes in the peloton to create a bike that delivers maximum performance. Trusted Aerodynamics The S-Series is designed to be an aerodynamic integrated system incorporating the rider, frame, and components. Frame tube shapes and design elements work together to manipulate and smooth the airflow over the bike and rider. The result: you go faster. Optimized Performance Stiffness in critical parts of the frame is essential for calm and precise handling and pedaling efficiency. Most aerodynamic bikes have to trade off aerodynamics for stiffness, but we worked hard to ensure the S-Series frames are stiff, while not sacrificing aerodynamic performance. Built For You Cervelo builds bikes that are easy to own - so you can spend less time servicing them and more time enjoying the ride. The S-Series is specced with components that are easy to upgrade, and the bike is designed to be ready for electronic, mechanical, or hydraulic shifting. - Carbon frame and fork - SRAM Force eTap AXS drivetrain - 1AER D5 48mm Disc carbon wheelset - SRAM Force HRD brakes - Cervelo carbon seatpost
$5,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1800 32 Spline wheels
$5,299.00
Meet the Roadmachine: the bike that truly does it all. Rooted in endurance, the frame has been revised to perfection and and features compliance-boosting attributes to make this bike your go-to choice for all-day adventures. As our highest performing all-rounder, it’s designed to go the distance. After all, what use is a road without the Roadmachine? Technology: - Tuned Compliance Concept (TCC) Endurance: The most capable version of our TCC technology: take the edge off the roughest roads to push harder and ride farther. The ultimate balance between comfort and performance for a ride that is both forgiving and fast. - D-Shape Seatpost: A new “D” compliance post is held in place by a clever, integrated clamping system. - Integrated Seatclamp: Seamless and functional integrated seatmast clamp. - BMC Flatmount Adapter: The Roadmachine front disc hardware comes equipped with a 140/160mm proprietary flat-mount bracket for maximal integration and seamless design.
$6,299.99
Domane SLR 6 Disc is built on the finest Domane frame Trek has ever made. It's a high-end endurance road bike with Front and Adjustable Rear IsoSpeed, so you can tailor your compliance to your terrain. It's equipped with a high-quality Shimano Ultegra parts group, flat mount disc brakes, wide tires, and a spec that makes it a great all-around road bike for adventure-ready riders who put a premium on light weight. It's right for you if... You're not afraid to stray from the pavement in the middle of a road ride, and you expect your bike to hold up to your every adventure whim. You want our lightest Domane frame ever, with the added benefit of hydraulic disc brakes and wider tires for speed, stability, and confidence. The tech you get Trek's lightest 600 Series OCLV Carbon frame with both Front and Adjustable Rear IsoSpeed. It's equipped with a full Shimano 2x11 Ultegra drivetrain, flat mount hydraulic disc brakes, Paradigm Comp Disc Tubeless Ready wheels, wide 700x32 tires for extra stability over rough surfaces, and a carbon Bontrager Pro IsoCore handlebar that reduces vibrations from the road by 20% over a standard carbon bar. The final word This bike isn't afraid to get dirty, and its greatest strength is its versatility. Rough roads, gravel, long climbs, epic all-day rides—Domane SLR 6 Disc does it all. It's light and fast, but the real value is in the road-smoothing advantage of IsoSpeed and the undeniably cool feature that lets you fine-tune the compliance of your frame. Why you'll love it 1 - You can tune the amount of compliance in your frame to your preference with a simple slider adjustment 2 - This bike is super versatile, and it can take you to places you never thought possible on a road bike 3 - The lightweight frame and quality drivetrain are fully capable of racing, competitive group rides, and weekend all-road adventure
Page 1 of 1