Filter By:
Parts & Accessories
$729.00
SRAM's power meter technology is reliable, accurate and easy to use. Now available as a spider by itself as an easy upgrade for existing cranks. The Dzero series offers improved data transfer and frame fit compatibility.
- Fits 8-Bolt interface Quarq XX1 Power Meters (8-Bolt used since Aug '14)
- Measures power for both legs with +/- 1.5% accuracy
- Dual Bluetooth lowenergy and ANT+ wireless data transfer
- AxCad system provides no-magnet cadence data
- Free firmware updates with the QALVIN APP
- Boost 148 compatible
$449.99
The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions.
Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems.
Additional features:
- ± 1.5 % accuracy in all conditions
- Active temperature compensation
- Accelerometer based cadence measurement
- Wirelessly upgradable firmware
- LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset
- Updated accelerometer and addition of gyroscope for improved cadence resolution
- Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength
Specifications
- Power meter housing: low profile design, 2x phillips head screw to access battery compartment
- Weight: Only adds 20g to base crankset
- Battery Life: 175+ hours (via coin cell: CR2032)
- Power range (Watts): 0 to 5000
- Cadence range (rpm): 10-220
- Water resistance rating: IPX7
In the box
- Drive-side power meter
- High quality CR2032 coin cell battery
- Lifetime access to Stages Link for power meter management and firmware upgrades.
- 2 months free access to Stages Link premium training and coaching features.
- Product Identification Card with Serial Number and ANT+ I.D. Number.
- User Guide
$64.05
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
$64.05
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
$16.00
This Wheels Manufacturing Spacer kit for PF30 Outboard bottom brackets includes 42mm ID spacers that fit between the PF30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
$10.00
This Wheels Manufacturing Spacer kit for BB30 Outboard bottom brackets includes 42mm ID spacers that fit between the BB30-OUT cup and the frame's bottom bracket shell. Use spacers for adjusting chainline. - 42mm ID - Black anodized aluminum Includes - (1) x 2.5mm - (2) x 1.0mm
$5.49
Problem Solvers Crank Arm Fixing Bolts
- 8mm
- Sold as a pair
Page 1 of 1