Brakes/Levers/Pads

The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone

Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with long cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

Key features: - Designed for use on carbon rims - Confirm wheel compatibility before use - Use in mud and grit will accelerate rim wear - 520554 is the Shimano style Flash Evo and fits Shimano and SRAM - 520555 is the Campagnolo style Race Pro

Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Jagwire's Road Pro Inserts are a nice upgrade for Shimano and SRAM sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims.

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

These disc brake pads fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance. - Low noise, high performance semi-metallic compound lasts longer than resin - Steel backing plate

Pro Semi-Metallic pads feature a lightweight aluminum backing plate attached to the same quiet and high-performance compound found on Jagwire's Sport Semi-Metallic series disc pads. Weight is reduced by nearly 50%. These pads are perfect for cross-country applications.

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Fit a variety of SRAM and Avid brakes and offer industry leading brake compounds for consistent, confident performance

Jagwire's Road Pro Brake Pads fit Campagnolo, Shimano and SRAM sidepull brakes. They feature Jagwire's tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy pad replacement without losing your brake shoe position. And there are wheel guides on the shoes to help when you're putting a wheel back on.

The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow. Features: - Hardened and Plated reinforced steel backbone - Patented Angled tip plow - Water grooves - Pad-Lock washer system - Available in Threaded and 2024 Aluminum Smooth Post Black: standard compound designed for dry condition riding Red: semi-aggressive compound for good performance Salmon: aggressive compound for extreme weather conditions Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

The Supra 2 is an updated design of the original Supra. This is one of Kool-Stop's most popular rim pads and offers a thicker friction material for longer life. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Self tow in - Available only in Threaded - Rim Friendly Compounds Compounds: - Salmon - Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Electric - Kool-Stop's E-Electric compound is formulated specifically for the higher speeds and weights of electric bicycles. - Clear - An extreme compound for only experienced trick or trails riders needing a compound that will instantly lock the wheels. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Pink - Colored pads are a semi–aggressive compound that will give you good performance in all weather conditions. Specifications: - Weight per pair: 60.6 grams - Overall length: 66.5 mm - Pad contact width: 9.1 mm

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Pre-bled hydraulic disc brake kit - 22mm dual piston post-mount caliper - Mineral oil compatible - Semi-metallic pads - Adjustable reach lever - Includes mounting hardware, IS adapter, spare barbed fitting & olive ferrule - Uses Origin8 disc brake pad models 120393/120281/120295 - Hose length: 1700mm hose (160mm rotor), 850mm hose (180mm rotor)

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

The SRAM CenterLine XR (CLX-R) rotor works in tandem with the SRAM eTap AXS drivetrain. It's designed specifically for road riding — and to keep braking quiet at every stop. - Streamlined form optimized for road use - CenterLine track offers quiet brake operation - Two-piece design reduces weight - Includes stainless steel rotor bolts