Skip to main content

Filter By:

Sport/Performance

Cervelo Caledonia 105
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano 105 drivetrain - Shimano 105 flat mount hydraulic disc brakes - Vittoria Zaffiro Pro V 700c x 30 tires
Cervelo Caledonia Ultegra
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
Cervelo Caledonia Ultegra Di2
Caledonia is a bike for the way riders ride. It’s not a Grand Tour bike, where the skinniest of chubby tires rub the stays, and it’s not a gravel bike butting up against a 1989 MB-1. It’s a bike for the rides that kick off at the cafe, hammer up thoroughfares to get out of town, wind through chip-seal backroads, take that cutty dirt road that links up to the base of the mountain, and then scream downhill back toward home. Caledonia doesn’t fit in a box nicely, and we like it that way. It was conceived on our Thursday night rides—routes that often play fast and loose with 'road ride'. As we tried to stuff bigger tires into our R5s and streamline our Asperos, a new kind of bike was born. Removable FDM Our bolt-on front derailleur mount is made from high strength aluminum alloy and attaches to the frame with two countersunk screws. This allows for easy replacement in the event of damage and enables you to adapt to new standards as they become available or remove the front derailleur mount completely if you choose a 1x system. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution. - Cervelo carbon frame and fork - Shimano Ultegra Di2 drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1850 23 Spline wheels
Cervelo Caledonia-5 Dura Ace Di2
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Dura-Ace Di2 drivetrain - 4iiii Precision dual-sided power meter - ENVE SES 3.4 AR Disc wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
Cervelo Caledonia-5 Force eTap AXS
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM Force eTap AXS drivetrain w/power meter - Reserve 35mm carbon rims/DT370 hubs - Cervelo carbon handlebars and seatpost
Cervelo Caledonia-5 Red eTap AXS
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - SRAM RED eTap AXS drivetrain w/power meter - Zipp 303 wheels - Cervelo carbon cockpit - Ceramic Speed bottom bracket
Cervelo Caledonia-5 Ultegra Di2
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Ultegra Di2 drivetrain - Reserve 35mm carbon rims/DT370 hubs - Prologo Dimension TiRox saddle
Cervelo R3 Ultegra Rim
$3,700.00
The R3 is a high performance allrounder, ready for everything from the Tuesday night world champs to an epic weekend ride. Light, stiff, and designed for confidence-boosting handling, this is a bike that you can trust. Using special carbon layup and construction techniques, Cervelo reduced the frame's weight while making it stiffer at key points. The result of this impressive stiffness-to-weight ratio is a lively and confidence-inspiring bike. Stiff and lightweight, with geometry that promotes stable and predictable handling, the R3 urges you to attack on the climb and push the pace on the descent. The R3 features a robust chain stay protector, future-proof cable management system (compatible across all types of shifting systems), and a reduced friction bottom bracket guide. Clearance for tires up to 28mm wide and frame compliance create a smoother ride. Features - Squoval Max tubes combine the attributes of a square with an oval, but with a more aerodynamic leading edge - BBright bottom bracket allows the use of larger-sized tubes in the seat tube, down tube, and lefthand chain stay - Elite Fit offers a wide range of positions for all athletes without compromising handling, comfort, or performance - Shimano Ultegra drivetrain - DT Swiss P1800 Spline wheels
Cervelo Caledonia-5 Ultegra
$5,000.00
The Caledonia-5 was inspired by our own out-the-front-door rides and built for the way we ride bikes. You could call it an "all road" or "endurance" bike, but when it comes right down to it, the Caledonia is the bike we keep reaching for when we know the odometer’s going well past the triple-digit mark. Long rides invariably have some smooth tarmac, some junk pavement over backroads, a cutty singletrack connector, and maybe even your own local Strade Bianche sector. So we built a bike that could take on all of them, do it well, and fit fenders in case the ominous clouds turn into a downpour 130km into your day. We don’t see road bikes as fragile machines meant only for putting watts into and receiving speed from. They’re an extension of our soul, of the way we want to see our worlds, and the lives we want to live. Sometimes that means cutting across park grass, and sometimes it’s seeing where that dirt road off to the left leads you. The Caledonia-5 is a bike for the modern road rider. Aero Cable Management The Cervelo frame, fork, handlebars, and associated components are designed to hide brake and shift control lines (mechanical, electrical, and hydraulic) from the wind for improved aerodynamics, without sacrificing usability or performance. Performance Fit The Caledonia’s integrated stem and two bearing cap options allow for stacks ranging between an aggressive 7mm and a relaxed 22mm without the use of spacers. With a wider fit coordinate range (stack) of 580mm to 687mm, the Caledonia can be as low as a slammed R3 or taller than our tallest C3. All while looking and being seamlessly fast in the wind. Integrated Accessory Mounts Integrated mounts enable the use of fenders, lights, and computers without compromising the aerodynamics or structure of your bike. The built-in mount systems provide a simple and clean-looking solution in a lighter weight frame. - Cervelo carbon frame and fork - Shimano Ultegra drivetrain - Shimano Ultegra flat mount hydraulic disc brakes - DT Swiss E1800 32 Spline wheels
Page 1 of 1